GLOCK .40 AUTO
- Thread starter .44 mag
- Start date
polymer......The Glock frame is made out of a high-tech plastic polymer called nylon 6...Commerical price for hi-grade Nylon 6 is about $3.50/lb. Commerical price for hi-carbon steel is about $1.50/lb. Sounds to me like the Glock is actually a better buy. Anyway, I did a little research and got a smattering of information on the Glock plastic "formula". One source says "more highly guarded than the Coke formula". From 3 human and 5 technical sources, Glock uses an out-sourced proprietary hybrid polymer mix with a base of Nylon 6. The frames are cast and offer high strength, wear resistance, abrasion resistance, and good resiliency, good ductility and toughness. Fracture mechanics are excellent with defect ratios below 1. Do not compare to extruded Nylons because it is different. Casting prices range from $3-$50/pound depending on process and intricacy. The Glock is considered highly-intricate due to imbedded metallic components. Offers long term performance at elevated and depressed temperatures. Chemically stable in a majority of environments, attacked directly by strong acids and bases (better than steel actually). UV exposure results in degradation over an extended period of time. 2-3% carbon black virtually eliminates UV degradation and Carbon-Black does not become readily absorbed in Nylons offering higly increased useful life spans. Loss of mechanical properties with 2% Carbon-Black is less than 0.05% on an elevated UV exposure test equivalent to approximately 100 years. Hyrdolytically attacked by water in excess of 120 degrees. Basically, no hot-tubbing with your Glock and you will be fine. Tupperware is not made from Nylon BTW.